Manufactured from Fibreglass designed specifically for your bike with a Chainguard incorporated
The Huggers are one of our trademark products designed specifically for your motorcycle and offering substantial added protection and individual styling. Where possible we incorporate protection that extends below the swingarm together with a built-in chainguard to replace your existing guard meaning that your shock absorber and chain are fully protected. Available in a wide range of colour schemes our Huggers will arrive safely packaged together with comprehensive fitting instructions and any additional fittings which may be required. No modification to your motorcycle is necessary.
We always advise the use of our Venture Shield protection film to minimise the effects of stone chips and cracking especially on painted products which sit low to the ground. Without Venture Shield fitted to these low forward facing parts of your bodywork then unfortunately damage from stones and other debris is unavoidable!
All necessary attachment points are prepared in advance. Cultivation is very easy. Many of the rear wheel covers we supply come with mounting kits included in delivery. No dismantling of the rear wheel necessary!
TThe rear wheel cover offered here does not have a certificate/ABE Please ask your test engineer regarding individual acceptance according to §21 In principle, approvals are at the discretion of the test engineers and experts.However, they must strictly adhere to the StVZO. Requires registration Components or assemblies for which an ABE or a parts certificate is required and which must be entered in the papers.Exception: If the ABE is carried, the entry is not mandatory. Intake connection/brake fitting/brake pads/brake fluid container/brake lever/brake lines/brake pedal/brake pump/brake disc/brake caliper/cockpit fairing/chassis raising/chassis lowering/suspension strut(s)/rims/footrest system/fork/fork bridge/fork springs/fork stabilizer/gear ratio/master brake cylinder/main stand/rear elevation/rear lowering/rear fairing/rear wheel cover/sprocket(if the number of teeth is not identical)/ fender/ manifold (only if pipe routing or cross section changes)/ lamp mask/ handlebars/ handlebar end indicators (on current motorcycles only in conjunction with rear pair of indicators)/ handlebar clamps (risers)/ steering damper/ air filter/ air filter insert (if the air flow rate changes)/ air filter box/ tires (if dimensions change) pinion (if the number of teeth is not identical)/ swing arm/Side stand/secondary transmission/seat (if the dimensions are massively changed)/pillion grab handles/speedometer/tank/carburettor/carburettor jetting/fairing/fairing keel/fairing window Link: https://www.motorradonline.de/ratgeber/ratgeber-dekra-gtue-kues-und-tuev-uebersicht-eintragungspflichtig-eintragungsfrei-abe-co/
