Main page » Trike » ABART-Shop » Technology » Engine » Engineparts » Air Cleaner » Air filter for BOOM Trike Mustang with Mitsubishi engine 1,5l
Air filter for BOOM Trike Mustang with Mitsubishi engine 1,5l
BOOM Trike Mustang with Mitsubishi engine 1,5l
Top filter for universal application
Perfect air filter with black cotton mat in a stable wire network. Due to the black color of the air filter, no striking color clever in the engine compartment and much more unobtrusive than other products. Our filters are also equipped with black, flexible silicone at the top and bottom. No scratching, no tears like with rigid metal elements. Our filters come forward, are washable and reusable.
Top filter for universal application
Perfect air filter with black cotton mat in a stable wire network. Due to the black color of the air filter, no striking color clever in the engine compartment and much more unobtrusive than other products. Our filters are also equipped with black, flexible silicone at the top and bottom. No scratching, no tears like with rigid metal elements. Our filters come forward, are washable and reusable.
It hardly takes longer than an advertising block in Formula 1: The care for your green filter
If you drive on pole postage, you must not lose time, so we made it easy for you to maintain your new green cotton air filter.
The filter is already pre -oiled and ready for installation for the first application.
A short check is enough every 10,000 to 20,000 kilometers: everything still clean? The green cotton air filter must only be cleaned if necessary.
Regular cleaning and care guarantees optimal air flow and maximum performance at any time.
Cleaning notes
Remove the green air filter.
Brush the coarse dirt from the air filter with a brush from the outside. Dust, leaves and flies are removed.
If you want, you can blow your green filter clean with compressed air. Only please pay attention to the filter at a sufficient distance so that the cotton structure is not destroyed. Important: The so -called blowing out happens against the air intake direction. So from the inside out.
Now soak your sports air filter with the special green filter cleaner, Art.-No. Net05 or Set NH01. Then let it work for at least 15 minutes.
Now let lukewarm water run through the filter. First from the inside, then from the outside. With extreme dirt, the procedure can be repeated two or three times.
Now pour out the water again and let the filter dry. This works on the heater or simply with a hairdryer.
To reunite again, simply use our specially developed green filter oil Art.No. H50, H300 or SET NH01.
Finally, the surface of the filter with the green filter oil, a special oil-resin mixture, wet and wipe excess oil with the rag. In order not to damage the air mass knife, make sure that evenly and not too much is sprayed. Install the green filter. Complete.
If you drive on pole postage, you must not lose time, so we made it easy for you to maintain your new green cotton air filter.
The filter is already pre -oiled and ready for installation for the first application.
A short check is enough every 10,000 to 20,000 kilometers: everything still clean? The green cotton air filter must only be cleaned if necessary.
Regular cleaning and care guarantees optimal air flow and maximum performance at any time.
Cleaning notes
Remove the green air filter.
Brush the coarse dirt from the air filter with a brush from the outside. Dust, leaves and flies are removed.
If you want, you can blow your green filter clean with compressed air. Only please pay attention to the filter at a sufficient distance so that the cotton structure is not destroyed. Important: The so -called blowing out happens against the air intake direction. So from the inside out.
Now soak your sports air filter with the special green filter cleaner, Art.-No. Net05 or Set NH01. Then let it work for at least 15 minutes.
Now let lukewarm water run through the filter. First from the inside, then from the outside. With extreme dirt, the procedure can be repeated two or three times.
Now pour out the water again and let the filter dry. This works on the heater or simply with a hairdryer.
To reunite again, simply use our specially developed green filter oil Art.No. H50, H300 or SET NH01.
Finally, the surface of the filter with the green filter oil, a special oil-resin mixture, wet and wipe excess oil with the rag. In order not to damage the air mass knife, make sure that evenly and not too much is sprayed. Install the green filter. Complete.
Unfortunately there are no reviews yet. Be the first who rates this product.
